Advanced Network Settings
41-001160-00, Rev 01 Release 2.0 4-35
Network Configuration of the IP Phones
Configuring the IP Phones
IP Phone UI
Step Action
1 Press on the phone to enter the Options List.
2Select Network.
3Select Type o f Ser vic e.
4Select SIP, RTP, and/or RTCP and enter a value from 0 to 63.
Note: If you change the ToS/DSCP setting for a Protocol, and VLAN is enabled, you will need to map
the applicable priority to the Protocol setting as shown in the table “DSCP Range/VLAN Priority” on
page4-34 For more information, see the section “Configuring VLAN (optional)” on page 4-36.
5 Press Done to save the changes.
6 Press Done 2 more times to return to the Options List menu.
7Select Phone Status.
8Select Restart Phone and press Restart to reboot the phone for the ToS/DSCP settings to take
affect.