Aastra Telecom 57I C53I manual Boot Sequence Recovery Mode, Force web recovery mode disabled

Advanced IP Phone Operational Features

Advanced Operational Features

Boot Sequence Recovery Mode

You can force the IP phone into recovery mode by pressing the 1 and # keys during boot up when the logo displays. This feature is enabled by default on the IP phone.

You can disable this feature using the following parameter in the configuration files:

•force web recovery mode disabled

Valid values for this parameter are 0 (false) and 1 (true). Default is 0 (false).

A boot counter increments after each faulty boot. When the counter reaches a predetermined value, it forces Web recovery mode. The counter is reset to zero upon a successful boot.

The predetermined value is set using the following parameter in the configuration files:

•max boot count

A zero (0) value disables this feature. The default value is 10.

You can configure the boot sequence recovery mode parameters using the configuration files only.

Configuring Boot Sequence Recovery Mode

Configuration Files

For the specific parameters you can set in the configuration files for boot sequence recovery mode, see Appendix A, the section, “Boot Sequence Recovery Mode.” on page A-136.

Advanced Operational Features

41-001160-00, Rev 01 Release 2.0 6-7