Aastra Telecom C53I manual Attribute/Option Description/Usage Valid Values Beep, Use with, Timeout

IP Phone Administrator Guide Operational Features

Operational IP Phone Features

You can also use the following attributes/options with the XML objects to further customize your XML applications:

Attribute/Option	Description/Usage	Valid Values
Beep	Enables or disables a BEEP option to	yes no
	indicate a status on the phone.	Default = no
	Use with:	Note: This value is
	XML object (See Appendix G)	case sensitive.
	Configuration files (See page 119)
	Aastra Web UI (See page 119)
xml status scroll delay (config files)	Allows you to set the time delay, in	1 to 25
Status Scroll Delay (seconds) (Web UI)	seconds, between the scrolling of each	Default = 5
	status message on the phone.
	Use with:
	Configuration files (See page 120)
	Aastra Web UI (See page 120)
Timeout	Specifies a timeout value for the LCD	0, 30, 45, 60
	screen display.	Default =45
	Use with:
	XML object (See Appendix G)
LockIn	Specifies whether or not the	yes no
	information on the LCD screen stays	Default = no
	displayed when other events occur
	(such as pressing buttons on the
	keypad).
	Use with:
	XML object (See Appendix G)
CancelAction	Specifies a URI that the phone	Fully qualified URI
	executes a GET on when the user
	presses the default CANCEL key.	For example:
		cancelAction=
	Use with:	http://
	XML object (See Appendix G)	10.50.10.117/
		ft.xml

5-118 41-001160-00, Rev 01 Release 2.0