Advantech ADAM 4000 user manual ADAM-4017+ Command Table, $AA1Ci Offset Calibration

Chapter 4

ADAM-4017+ Command Table

Command	Command Name	Command Description	Page
Syntax			No.
%AANNTTCCFF	Configuration	Set the address, input range, baud rate,	5-4
		data format, checksum status and/or
		integration time for the specified analog
		input module
$AA2	Configuration	Return the configuration parameters for	5-10
	Status	the specified analog input module
$AAF	Read Version	Return the firmware version code from the	5-12
		specified analog input module
$AAM	Read the Module	Return the module name from the	5-13
	Name	specified analog input module
#AA	Read Analog Input	Return the input values from all channels	5-14
	from all Channels	of the specified analog input module
#AAN	Read Analog Input	Return the input value from channels	5-16
	from Channel N	number N of the specified analog input
		module
$AA5VV	Enable/disable	Enables/disables multiplexing	5-17
	Channels for	simultaneously for seperate channels of
	Multiplexing	the specified input module
$AA6	Read Channel	Ask the specified input module to return	5-18
	Status	the status of all eight channels
$AA0Ci	Span Calibration	Gain error calibrate of assignment channel,	5-27
		User have to input the external standard source
		for calibrating process
$AA1Ci	Offset Calibration	Offset error calibrate of assignment channel,	5-28
		User have to input the external standard source
		for calibrating process
$AA7CiRrr	Input Range	Input range setting individually	5-29
	Setting
$AA8Ci	Read Input Range	Get the input range of the assignment	5-30
		channel
$AAXnnnn	Watchdog Timer	Set communication WDT cycle time from	5-31
	Setting	0000 ~ 9999 (unit: 0.1 second. if value is
		0000, the communication WDT function
		will be disable)
$AAY	Read Watchdog	Read the cycle time setting of	5-32
	Timer Setting	communication WDT

Chapter 4 Command Set 4-15