Advantech ADAM 4000 user manual $AA4S

Command Set

ADAM-4080D Command Table (Continued)

Command Syntax	Command Name		Command Description		Page
					No.
$AA4S	Enable/Disable		Enables or disables the digital		7-49
	Digital Filter		filter of the addressed
			counter/frequency module
$AA4	Read Filter Status		The addressed counter frequency		7-50
			module returns the status of its
			digital filter
$AA0H(data)	Set Minimum	Input	Sets the minimum input signal		7-51
	Signal Width at High		width at high level for a	specified
	Level		counter/frequency module
$AA0H	Read Minimum Input		Reads the minimum input signal		7-52
	Signal Width at High		width setting at high level	for a
	Level		specified counter/frequency
			module
$AA0L(data)	Set Minimum	Input	Sets the minimum input signal		7-53
	Signal Width at Low		width at low level for a specified
	Level		counter/frequency module
$AA0L	Read Minimum Input		Reads minimum input signal		7-54
	Signal Width at Low		width setting at low level for a
	Level		specified counter/frequency
			module
$AA1H(data)	Set Non-isolated		Sets the high trigger level of		7-55
	High Trigger Level		non-isolated input signals for a
			specified counter/frequency
			module
$AA1H	Read Non-isolated		Requests the addressed counter		7-56
	High Trigger Level		frequency module to return the
			high trigger level for non-isolated
			input signals
$AA1L(data)	Set Non-isolated Low		Sets the low trigger level of		7-57
	Trigger Level		non-isolated input signals for a
			specified counter/frequency
			module
$AA1L	Read Non-isolated		Sets the low trigger level of		7-58
	Low Trigger Level		non-isolated input signals for a
			specified counter/frequency
			module

(Continued on following page)

4-42 ADAM 4000 Series User’s Manual