Chapter 4
Chapter 4 Command Set
4-39
ADAM-4080 Command Table (Continued)
Command Syntax
Command Name Command Description Page
No.
@AAPN(data) Set Initial Count
Value of Counter N Sets the initial count value of the
module for counter 0 or counter 1 7-61
@AAGN Read Initial Count
Value of Counter N Reads the initial count value of
counter 0 or counter 1 7-62
@AAEAN Enable Alarm of
Counter N
Enable alarm for the specified
counter 0 or counter 1
7-63
@AADAN Disable Alarm of
Counter N Disable alarm for the specified
counter 0 or counter 1 7-64
@AAPA(data) Set Alarm Limit Value
of Counter 0
Download the alarm limit value for
counter 0 of the specified module 7-65
@AASA(data) Set Alarm Limit Value
of Counter 1
Download the alarm limit value for
counter 1 of the specified module 7-65
@AARP Read Alarm Limit
Value of Counter 0 Ask the module to return the alarm
limit value of counter 0 7-66
@AARA Read Alarm Limit
Value of Counter 1 Ask the module to return the alarm
limit value of counter 1 7-66
@AADO (data) Set Digital Output
Values Set the values of the module's two
digital outputs (ON or OFF) 7-67
@AADI Read Digital Output
and Alarm Status Ask the module to return the
status state of its two digital
outputs and the status of its alarm.
7-68