Chapter 4
Chapter 4 Command Set
4-43
ADAM-4080D Command Table (Continued)
Command Syntax
Command Name Command Description Page
No.
@AAEAT Enable Alarm Enable the alarm in either
momentary or latching mode 7-69
@AADA Disable Alarm Disable all alarm functions 7-70
@
AACA Clear Latch Alarm
The latch alarm is reset
7-71
@AAPA(data) Set Low-Alarm
Count Value of
Counter 0
Downloads the low-alarm count
value for counter 0 of the specified
counter/frequency module
7-72
@AASA(data) Set High-Alarm
Count Value of
Counte r 0
Downl oads the high-alarm count
value for counter 0 of the specified
counter/frequenc
y
modul e
7-73
@AARP Read Low-Alarm
Count Value of
Counter 0
Ask the addressed module to
return its low-alarm count value for
counter 0
7-74
@AARA Read High-Alarm
Count Value of
Counter 0
Ask the addressed module to
return its high-alarm count value
for counter 0
7-75
@AADO(data) Set Digital Output
Values
Set the values of the module's two
di
g
ital outputs
(
ON or OFF
)
7-67
@AADI Read Digital Output
and Alarm Status Ask the module to return the status
state of its two digital outputs and
the status of its alarm.
7-68