Command Set
4-
20
ADAM 4000 Series User’s Manual
ADAM-4018M Command Table
Command Syntax Command Name Command Description Page
No.
%AANNTTCCFF Configuration Set the address, input range, baud
rate, data format, checksum status
and/or integration time for the
specified analo
g
input module
5-4
$AA2 Configuration
Status Return the configuration
parameters for the specified
analo
g
input module
5-10
$AAF Read Version Return the firmware version code
from the specified analog input
module
5-12
$AAM Read Module
Name
Return the module name from the
specified analo
g
input module
5-13
#AAN Read Analog Input
from Channel N Return the input value from
channels number N of the
specified analog input module
5-16
$AA5VV Enable/disable
Channels for
Multiplexing
Enables/disables mult iplex ing
simultaneously for seperate
channels of the specified input
module
5-17
$AA6 Read Channel
Status Ask the specified input module to
return the status of all eight
channels
5-18
$AA0 Span Calibration Calibrate the analog input module
to correct for gain errors 5-19
$AA1 Offset Calibration Calibrate the analog input module
to correct for offset errors
5-20
$AA3 CJC Status Returns the value of the CJC
sensor for a specified an alo g i npu t
module
5-25
$AA9SNNNN CJC Offset
Calibration
Calibrates the CJC sensor for
offset errors
5-26
@AACCCSDMTTTT
Set Memory
Configuration Set the channel storag e status,
standalone mode, data logg er
mode, storage type and sampling
interval for the sp ecified analog
input data lo
gg
er.
5-37
@AAD Read Memory
Configuration Return the configuration
parameters for the specified
analog input data logger.
5-39
@AASO Set Memory
Operation Mode
Start/stop the recording function of
the memor
y
module.
5-40