AEG PV.630 manual MPP Tracker, Linked Operation

Protect PV.630 Operating Instructions

5.4MPP Tracker

In the “Operation” status (see Chapter 5.1.3), the inverter detects the maximum power point (MPP) of the PV cells.

The MPP tracker detects the point at which the solar cells give off maximum power.

This enables the system to achieve optimum efficiency.

Figure 9 MPP performance curve

5.5Partner Operation

In “partner operation”, the efficiency of a system with two inverters can be increased by connecting the two PV cells at less than full power.

If insolation levels fall, the PV cells are connected and only one in- verter is in operation.

If insolation levels rise, the connection is terminated. Now both in- verters are in operation. Each inverter is supplied with power by its associated PV panel.

5.5.1Linked Operation

One inverter is switched on and is feeding power into the mains.

The other inverter is logically switched off. The tie switch is closed.

The inverter which is active in linked operation changes daily.

This operating mode is active when insolation levels are low.

36 of 72 8000047961 BAL