Inspection, Contact with voltage | AEG PV.630 specs

Protect PV.630 Maintenance and Servicing

4.3Inspection

The system is inspected to establish its current condition; the ac- tual content of the inspection and the intervals at which it is to be performed must be defined on the basis of the relevant installation site and operating conditions.

DANGER

Contact with voltage.

Inspection work must sometimes be performed when the system is connected to the power supply.

Risk to life due to electric shock.

Only trained skilled personnel may carry out work on the system.

Do not touch any live parts.

Secure the work area.

Observe the safety regulations.

Observe the Technical Rules for Plant Safety (TRBS = Technische Regeln für Betriebssicherheit).

Wear personal protective equipment.

i

With all relevant precautionary measures in place, the measuring lines must be routed to the live measuring points in order to record measured data.

6 of 14

80000047962 BAL

Image 103

AEG PV.630 manual Inspection, Contact with voltage

Contents

Protect PV.630 Page Page Page Operating instructions Protect PV.630 AEG Power Solutions GmbH Table of Contents System Function Monitoring Systems, Messages and Faults Graphical Display and Operation Unit Interfaces Validity Information on How to Use these InstructionsWarranty General Information Handling Target GroupsExplanations of Target Groups Obligations of the Equipment Operator Skilled Personnel Skills and Trainings Obligations of skilled personnel Storing Instructions Explanation of Symbols Explanation of Symbols and Safety InstructionsSymbol Meaning Symbol Meaning for skilled personnel Safety InstructionsSignal Words Used Hazard Symbols Used Signs Containing Orders for Personal Protective Equipment Safety Awareness Emergency Procedure e.g. in the Event of a FireAbbreviations Lightning protection Particular Dangers associated with Photovoltaic SystemsCrystalline silicon cells Thin-film cells Protective Covers Safety Signs and Warning Notices on the EquipmentSafety and Protection Devices for the Equipment System stop switch Guard Lockable Equipment DoorsResidual Hazards Electrical Hazards Risk of injury due to rotating fans Risks Due to Moving PartsFire-Related Risks Water in electrical equipment Risks due to Loss of Control Risks from Maintenance and Repair Work Product Description Product DetailsImportant information about equipment documenta- tion Safety Dimensions and ViewsAppropriate Use Standards, Directives and CE Mark Inappropriate UseNameplate Technology Operating Elements Partner Operation System DescriptionOperating Modes Individual Operation Waiting for Feed Conditions Status System FunctionDescription of Sequence Control OFF Status Waiting Status Operation Status Early morning Fault StatusNight Status Sequence Control During the Course of the Day Night DayEvening Later in the evening Sequence Control Parameters Inverter stack switch-on timePermissible voltage dip after switching on the stack Power limit value for shutdown, delay time for shutdown Fan Control, Cabinet Fan Description of Fan Control General Fan Control, Inverter Stack Fan Cabinet Fan Control Parameters Insulation Monitoring and Earthing of PV Cells General Igbt temperature limit value for switching off the fanIgbt temperature limit Parameters of Inverter Stack Fan Control Sequence control Maintenance modeOperation with Thin-Film Solar Cells General Insulation Monitoring Parameters Insulation Monitoring in Partner Operation Linked Operation MPP Tracker Change of status to separate operation Single OperationChange of status to linked operation Partner Operation During the Course of the Day Linked Operation in the Event of a Fault Later that morning Extended operating modeLoad threshold for connecting the INV Partner Operation Parameters Power rating for increased feed-in capacity Monitoring Systems, Messages and FaultsParameters of the Extended operating mode Power rating for normal feed-in capacity Protect PV.630 Operating Instructions Temperature monitoring systems Table of Faults Can I/O monitoring systems Fault/Message Unit Monitoring Systems Fault/Message DC voltage monitoring systems Fault/Message Communication Interface Interfaces Communication data port 3 Technical Data MultiCom CCC hardware data assembly A29.1Communication data port 1 Communication data port 2 Button Configuration jumpersStructure of the MultiCom CCC Interface Connections Description of serial interfaces Shield connection of the RS485 bus line Port 2 X5 RS485 pin assignment default Controller Area Network can at Port 2 X5 RS232 pin assignmentPort 3 X4 can pin assignment Configuration Preparations ConfigurationSetting the terminal program Carriage return or Enter key Data protocol configuration Configuring the Modbus Protocol Modbus/JBus data transmission configuration Configuring Modbus Data Transmission Network Connection COM Server GeneralStructure of the COM Server Installation of the COM Server Configuration of the Virtual COM Port Network Integration Configuration Technical data Remote SignallingStructure Following default signals are used for remote signalling DOU Graphical Display and Operation Unit LEDs SignallingAcoustic signal generator Keyboard Operation Start-up Possible symbol keys and their function Main Menu Menu Structure Menu Tree Operating display Normal operation Operating Display Example of operating display Examples of possible displays Solar radiation is too low, the inverter is in standby mode Monthly data t = day 1 31 for the last 12 months Example of yearly overview Status/Measured Values Menu Menu Inverter Blocking Information Fault HistorySettings Service Installation and Start-up 80000047963 BAL Start-up Connection WorkIsolating Solar Inverters General Information Safety Storage Transport, Storage and InstallationInstallation Site Requirements, Operating Area Packaging Air vents on the system 1=supply air, 2=exhaust air Risk of accident due to suspended loads Using a Crane to Transport and Install the SystemPreparations Transporting the Equipment Risk of accident due to transport with industrial trucks Using a Forklift or Lowlift Truck to Transport the SystemPreparation Transporting a system using industrial truck Bottom attachment 80000047963 BAL Installing, Aligning, Attaching Tightening Torque Values for Screw Connections Connection Work Installation without control cabinet doors Control/Monitoring terminals System not installed correctlyPower terminals External Connections Cables are connected as follows Start-up Start-up Preparations Before connecting the AC voltage, checkPrerequisites Connection of AC Voltage Medium voltage Switchgear not connected correctlyRight bridge block Auxiliary power supply via external circuit Connection of DC Voltage After connecting the DC voltageField rotation fault fault message Other fault indications Isolating Solar Inverters Isolation Procedure Maintenance and Servicing Protect PV.630 Maintenance and Servicing Fault Messages General Information Scope of the Recommended Measures Maintenance and Repair Inspection View of cabinet without doors 80000047962 BAL Visual Inspection Obligation to Keep a Written Record Diagnostic FunctionsReading Out the Memory Removing Accumulated Dust Isolating Solar Inverters Functional Test System Stop Cleaning and Checking the Protection DevicesMaintenance Checking the Monitoring System Repair Additional Work Installing the fan Removing and Installing the FansRemoving the fan Power Section Spare Parts and Customer Service Fault MessagesComponent Page Protect PV.630 Page CEA Page X3UVWPE Page 1000003063 Page Peinv Page F83 Page A29.1 A27 A20 Page 1000003063 en