AEG PV.630 manual Using a Forklift or Lowlift Truck to Transport the System, Preparation

Protect PV.630 Installation and Start-up

4.5Using a Forklift or Lowlift Truck to Transport the System

WARNING

Risk of accident due to transport with industrial trucks!

Possibility of death or very serious injury.

Only use industrial trucks if it is not possible to use a crane.

Only trained personnel working specifically in the area of transport may transport the system.

Secure the danger zone.

Wear personal protective equipment.

Please note the following before transport:

Do not exceed the permissible weight that can be carried by the industrial truck or lowlift truck. The total weight of the equipment is specified in the technical data sheet.

Be aware of the equipment's centre of gravity. The centre of gravity is indicated on the figure above.

Use industrial trucks or lowlift trucks with lifting arms which are long enough and far enough apart.

i

Transport with an industrial truck or lowlift truck should be avoided in particular on construction sites and/or uneven ground unless absolutely necessary.

Preparation:￿

Leave the individual control cabinets on the transport pallets.

If individual units are to be transported, the pallet can only be lifted from the front or back. If units which are supplied already screwed together to form a single system are to be transported, the pallet can only be lifted from the sides.

Figure 3 Transporting individual control cabinets

80000047963 BAL 9 of 21