AEG PV.630 manual Fault History, Settings, Information, Service, Help

Protect PV.630 Operating Instructions

The default password set by the factory is: 1201.

In menus where switching operations are normally possible, block- ing is indicated by a key.

8.3.6 Fault History

You can call up the “Fault history” menu from the “Main menu”. A data logger that records the inverter's fault history is integrated in the inverter unit. You can display the 20 most recent faults as of the current date or as of a specific date.

8.3.7Settings

You can call up the “Settings” menu from the “Main menu”. Here you can set the following parameters in the submenus:

LCD contrast, Language, Real time and Acoustic signal gener- ator for indicating faults and keyboard operation

8.3.8Information

You can call up the “Information” menu from the “Main menu”. Us- ing this menu, you can call up information about the unit type, the firmware versions and the available communication options.

8.3.9Service

You can call up the password-protected “Service” menu from the “Main menu”. The password must be entered digit by digit and then confirmed by pressing the ENTER key.￿

The default password set by the factory is: 1201.

Once the current password has been entered, you can select a submenu where you can change the DOU password.

∙In the “Password” menu, you can set the password for block- ing operation and for setting parameters. A range of 0000 to 9999 is possible.

I	Keep the password secure.
	If you have forgotten the password, the DOU will need to
	be reset at the customer's expense!

8.3.10 Help

You can call up the “Help” menu from the “Main menu” using the “?” key. This enables you to look up the meaning of the keyboard symbols.

72 of 72 8000047961 BAL