AEG PV.630 Technical Data MultiCom CCC hardware data assembly A29.1, Communication data port 1

Protect PV.630 Operating Instructions

7.1.2Technical Data

MultiCom CCC hardware data (assembly A29.1)

Connector	:	Port 1 RS232 for configuration
		and COM server connection
X2: 9-pin D-sub (socket; insulated)
		Port 2 RS232/RS485 for Modbus
X5: 9-pin D-sub (socket; insulated)
RS485 connection:		Twisted pair with Data+, Data-,
		shielded, shield attached on one side
Distance:		1200 m max. at 9600 baud
Bus stations:		Max. 32
Data line:		Shielded 1:1 data line
		(2 x 0.22; twisted pair),
		e.g. Lapp “UNITRONIC-BUS LD”

Port 3 CAN bus for remote panel

X4: 3-pin Combicon connector

Communication data port 1 (X2)

Protocol:	CBSER
Transmission rate:	1200 - 57,600 baud (adjustable)
Transmission parameters:	9600 baud, 8, E, 1 (default)

Configuration mode: 9600 baud, 8, N, 1

Communication data port 2 (X5)

Protocol:	Modbus
Transmission mode:	Half-duplex
Transmission code:	RTU
Transmission rate:	1200 - 57,600 baud (variable)
	19,200 baud (default)
Start bits:	1
Data bits:	8
Parity:	none, even, odd (variable)
Stop bits:	2 with no parity, 1 with parity
Function code:	03	(read register)
	06	(write register)
	16	(write multiple registers)

Min. response time of slave: 0-99 ms variable (0 ms default)

Modbus slave address: 01-99 (adjustable) (01 default)

Communication data port 3 (X4)

Protocol:	Proprietary CAN bus
Transmission rate:	50 kbaud

8000047961 BAL 47 of 72