AEG PV.630 manual Start-up Preparations, Prerequisites, Before connecting the AC voltage, check

Protect PV.630 Installation and Start-up

6.1Start-up Preparations

The following are required:

3-pin phase-rotation indicator

Multimeter

Two-pin voltage detector

Circuit diagram

Prerequisites:

All miniature circuit breakers are switched on.

All circuit breakers and load interrupters are switched off.

Protect PV.

		+DCD/ACD
Modul)	+INV	-K7
	-Q4.1	-A1
	-F41		-L26
DC (PV-		Control
			-F13,
			-F22,
	-F38,		-F60,
	-F81	Com	-F61,
			-F101

+NSHV

-Q26 -Q1

2

1

EVU-Netz Mains

Figure 7 - Functional principle, with miniature circuit breakers shown

i

Isolating points Q1 and Q26 are designed on a system- specific basis and do not form part of the PV.630.

Before connecting the AC voltage, check:

Auxiliary power supply circuit selection circuit 1/circuit 2

Select the auxiliary power supply circuit by positioning the bridge block on terminal X14.

X14

1 2 3 4 5 6 7

8 9

1 1 1

0 1 2

X14	1	2	3	4	5	6	7	8	9	1	1	1
										0	1	2

1 2

Figure 8 – Auxiliary power supply circuit selection 1 left bridge block:

80000047963 BAL 17 of 21