AEG PV.630 Configuring Modbus Data Transmission, Modbus/JBus data transmission configuration

Protect PV.630 Operating Instructions

7.1.4.3 Configuring Modbus Data Transmission

To access the X5 data transmission configuration, you must press <2> in the main menu:

Figure 21 Modbus/JBus data transmission configuration

Press one of the following keys in the “X5 Data Transmission” menu:

∙<1-7> to set the baud rate.

∙<n,e,o> to set the parity.

∙<8,9> to set the number of stop bits.

∙<CR> to accept the set values. The configuration is finished and the main menu is opened again.

∙<ESC> to cancel the configuration. This opens the main menu. The Modbus factory setting is: 19200 8 E 1.

8000047961 BAL 55 of 72