AEG PV.630 manual Installing, Aligning, Attaching, Bottom attachment 80000047963 BAL

Protect PV.630 Installation and Start-up

4.6Installation and Assembly in the Event of Control Cabinets Being Supplied Separately

ATTENTION

Inadequately qualified and untrained skilled person- nel can damage the system!

This can cause considerable damage to equipment.

Only qualified skilled personnel trained by the manu- facturer may install and assemble the individual control cabinets (if they are supplied separately).

i

If the control cabinets are supplied separately, the sealing strip provided must be stuck in place between them (run- ning all the way around) before the system is installed.

The control cabinets must also be bolted together at the appropriate points.

4.7Installing, Aligning, Attaching

Four holes are provided for the fixing bolts in the frame of each control cabinet.

The spacings and diameters of the holes can be found in the draw- ing below.

Align the system vertically and compensate for any uneven- ness.

Attach the system to the floor.

Bolt individual cabinets at the appropriate points (through the frame at the top and at the vertical posts at the front and back).

1500

660

925

1200

600

625

Figure 5 Bottom attachment

80000047963 BAL 11 of 21