Agilent Technologies 54622D, 54624A, 54621D, 54622A General Characteristics, Power Requirements

General Information

General Characteristics

*Denotes Warranted Specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ±10 °C from firmware calibration temperature.

General Characteristics

Physical:
Size	32.26 cm wide x 17.27 cm high x 31.75 cm deep (without handle)
Weight	6.35 kgs (14 lbs)
Calibrator Output	Frequency ~1.2 kHz; Amplitude ~5 V
Trigger Out	0 to 5 V with 50 Ω source impedance; delay ~ 55 ns
Printer Power	7.2 to 9.2 V, 1 A
Kensington lock	Connection on rear panel for security
Power Requirements
Line Voltage Range	100 - 240 VAC ±10%, CAT II, automatic selection
Line Frequency	47 to 440 Hz
Power Usage	100 W max
Environmental Characteristics
Ambient Temperature	Operating -10 °C to +55 °C
	Non-operating -51 °C to +71 °C
Humidity	Operating 95% RH at 40 °C for 24 hr
	Non-operating 90% RH at 65 °C for 24 hr
Altitude	Operating to 4,570 m (15,000 ft)
	Non-operating to 15,244 m (50,000 ft)
Vibration	HP/Agilent class B1 and MIL-PRF-28800F Class 3 random
Shock	HP/Agilent class B1 and MIL-PRF-28800F (operating 30 g, 1/2 sine, 11-ms duration, 3
	shocks/axis along major axis. Total of 18 shocks)
Pollution degree2	Normally only dry non-conductive pollution occurs. Occasionally a temporary
	conductivity caused by condensation must be expected.
Indoor use only	This instrument is rated for indoor use only

1-17