Agilent Technologies 54621A To remove the keyboard assembly, Replacing Assemblies, C A U T I O N

Replacing Assemblies

To remove the keyboard assembly

To remove the keyboard assembly

1Remove the front panel.

2Remove all of the knobs by pulling them straight out.

3Using the T10 TORX driver, remove the four screws from the keyboard shield.

4Lift the ribbon cable end of the small keyboard and simultaneously slide the small keyboard toward the main keyboard to remove.

Figure 6-12

		Removing the keyboard assembly
C A U T I O N		USE CORRECT SCREWS TO AVOID DAMAGING FRONT PANEL
		LABEL!
		When you re-install the keyboard, you must re-insert the screws you removed
		in this step. If you re-insert screws that are longer, they can damage the front
		panel label.
	5 Lift the keyboard assembly straight out.

6-15