Agilent Technologies 54621A, 54624A To verify bandwidth, Equipment Required to Verify Bandwidth

Testing Performance

To verify bandwidth

To verify bandwidth

This test verifies bandwidth. In this test you will use an oscilloscope calibrator with a level sinewave output.

You will use the peak-to-peak voltage both at 1 MHz and at bandwidth frequency to verify the bandwidth response of the oscilloscope.

54622A, 54622D, and 54624A Test limits at 1 mV/div to 5 V/div:

• All channels (±3 dB)

• dc to 100 MHz

• ac coupled 10 Hz to 100 MHz

54621A and 54621D

Test limits at 1 mV/div to 5 V/div:

• All channels (±3 dB)

• dc to 60 MHz

• ac coupled 10 Hz to 60 MHz

Table 3-6	Equipment Required to Verify Bandwidth
	Equipment	Critical Specifications	Recommended Model/Part
	Oscilloscope Calibrator		Fluke 5820A
	Cable *	Type N (m), 24-inch	Agilent 11500B
	Feedthrough	50Ω, BNC (m) and (f)	Agilent 11048C

*The oscilloscope calibrator is supplied with 2 or more coaxial cables N (m), BNC (m), 1 meter long, Fluke P/N 686318.

3-13