8.4.4Interrupt Status Register (INTSTS, Offset 30h) (Slave Mode)

The Interrupt Status Register controls DMA activity when nonmaskable interrupts occur and indicates the current interrupt status of the three timers.

Figure 8-20 Interrupt Status Register (INTSTS, offset 30h)

15

7

0

Reserved

DHLT

 

TMR1

 

 

 

 

 

TMR2 TMR0

The INTSTS Register is set to 0000h on reset.

Bit 15: DMA Halt (DHLT)—When set to 1, halts any DMA activity. Automatically set to 1 when nonmaskable interrupts occur and reset when an IRET instruction is executed.

Bits 14–3: Reserved

Bits 2–0: Timer Interrupt Request (TMR2–TMR0) —When set to 1, indicates the

corresponding timer has an interrupt request pending.

Interrupt Control Unit

8-31

Page 119
Image 119
AMD Am188TMER Interrupt Status Register INTSTS, Offset 30h Slave Mode, Interrupt Status Register INTSTS, offset 30h