CHAPTER

3 SYSTEM OVERVIEW

This chapter contains descriptions of the Am186ER and Am188ER microcontroller pins, the bus interface unit, the clock and power management unit, and the power-save operation.

3.1PIN DESCRIPTIONS

Pin Terminology

The following terms are used to describe the pins: Input—An input-only pin.

Output—An output-only pin.

Input/Output—A pin that can be either input or output.

Synchronous—Synchronous inputs must meet setup and hold times in relation to CLKOUTA. Synchronous outputs are synchronous to CLKOUTA.

Asynchronous—Inputs or outputs that are asynchronous to CLKOUTA.

A19–A0

Address Bus (output, three-state, synchronous)

 

The A19–A0 pins supply nonmultiplexed memory or I/O addresses to

 

the system one-half of a CLKOUTA period earlier than the multiplexed

 

address and data bus (AD15–AD0 on the Am186ER microcontroller or

 

AO15–AO8 and AD7–AD0 on the Am188ER microcontroller). During a

 

bus hold or reset condition, the address bus is in a high-impedance

 

state.

AD7–AD0

Address and Data Bus

 

(input/output, three-state, synchronous, level-sensitive)

 

These time-multiplexed pins supply partial memory or I/O addresses,

 

as well as data, to the system. AD7–AD0 supply the low-order 8 bits of

 

an address to the system during the first period of a bus cycle (t1). On

 

a write, these pins supply data to the system during the remaining

 

periods of that cycle (t2, t3, and t4). On a read, these pins latch data at

 

the end of t3.

 

Also, if

 

 

 

 

 

S0/SREN (show read enable) was pulled Low during reset or if

 

the SR bit is set in the Internal Memory Chip Select (IMCS) Register,

 

these pins supply the data read from internal memory during t3 and t4.

 

On the Am186ER microcontroller, AD7–AD0 combine with AD15–AD8

 

to form a complete multiplexed address and 16-bit data bus.

 

On the Am188ER microcontroller, AD7–AD0 combine with AO15–AO8

 

to form a complete multiplexed address bus while AD7–AD0 is the 8-bit

 

data bus.

System Overview

3-1

Page 33
Image 33
AMD Am188TMER System Overview, PIN Descriptions, Pin Terminology, A19-A0 Address Bus output, three-state, synchronous