This dialog box will appear every time you start your computer until you make at least a minimum set of disks. It is very important that you make at least a minimum set. (You can stop the dialog box from appearing by removing the Floppy Disk Maker alias from the Startup Items folder in the System Folder. See “Problems Starting Up the Computer” in Chapter 7 for more information.)
If you clicked the Quit button in the Floppy Disk Maker dialog box, you can find Floppy Disk Maker in either the Applications/Utilities section of Software Highlights or in the Floppy Disk Maker folder (inside the Utilities folder) on your hard disk. (See “Using Software Highlights” in Chapter 5 for more information.)
2Click Minimum Set or Full Set, depending on the kind of disk set you want to make.
If you are making a minimum set, you can press the Return key. You can make a minimum set first so you have a set of system software disks, and then use Floppy Disk Maker to make the other disks later. (See “Making Individual Disks” later in this section for instructions when you want to make the additional disks.)
If you need to stop Floppy Disk Maker in the middle of making a set of disks, click Quit. Floppy Disk Maker will remember where you were in the disk- making process, and will resume where you left off when you next open Floppy Disk Maker.
3Follow the instructions on the screen until a message tells you that you’re finished.
Insert a new disk whenever the screen messages tell you to do so. Do not use the Disk Tools floppy disk that came with your computer.
Insert the disk metal end first, label side up.
12Chapter 1
