Apple 190 series manual Inserting an expansion bay module, Gripping surface

4 Hold the module by the gripping surface and pull it out of the computer.

Hold the module by the gripping surface and pull it completely out of the computer.

Gripping surface

The module release latch automatically slides back into its proper position as you remove the module.

IMPORTANT You should not remove an expansion bay module if it is in use or you may lose data. If you try to remove the module when it is in use, you’ll see a message telling you to reinsert it. Reinsert the module, close any files and quit any programs using the floppy disk or other medium, then drag the medium’s icon to the Trash or choose Put Away from the File menu.

If you put your computer to sleep while a floppy disk or other medium is inserted, the module’s green in-use light will flash (similar to the sleep indicator light on your computer’s display). Do not remove the module while the in-use light is flashing.

Inserting an expansion bay module

To reinsert the expansion bay module, slide the module in. Make sure the gripping surface is facing down. The release latch automatically returns to the locked position.

Using Expansion Bay Modules and PC Cards 39