Apple 190 series manual Putting the computer to sleep

4While holding down the trackpad button, move the arrow down the list of choices until the words “Shut Down” are highlighted, then release the button.

Trouble? If a problem with the computer prevents you from using the Power key or choosing Shut Down—for example, if the computer “freezes” so that the pointer does not respond to the trackpad—you can turn off the computer by pressing the reset button (marked with an I) on the back of the computer. Use this method only if you cannot click Shut Down or Restart in the dialog box that appears when you press the Power key, or if you cannot choose either command from the Special menu.

Putting the computer to sleep

Sleep is a power conservation feature of Macintosh PowerBook computers, reducing the amount of power the computer draws when it’s not being used. When the PowerBook is in sleep, it has a darkened screen and appears to be off. A small green light flashes on the top of the display when your computer is in sleep. (Note: The computer must be on in order for you to put it to sleep.)

To put the computer to sleep, follow these steps:

1Press and hold the Power key for about two seconds.

2In the dialog box that appears, click the Sleep button.

WARNING Once you put your computer to sleep, listen for the hard disk to stop spinning before you transport your Macintosh PowerBook. Transporting your Macintosh PowerBook with the hard disk spinning can damage your computer.

20Chapter 1