1
2
3
Using Apple Remote Access with a PC Card modem
Apple Remote Access uses modem files (sometimes called connection scripts or CCLs) to get the best performance from some modems. Follow these steps to select your modem file:
Insert your PC Card modem.
Open the ARA application program.
Open Remote Access Setup.
The following screen appears:
Select the modem you are using here.
Select the slot your PC Card modem is inserted in here.
4Choose your modem from the Modem
If your PC Card modem is not listed, check in the ARA Connection Files folder (inside the PC Card Modem Files folder in the Apple Extras folder on your hard disk). If the file for your modem appears, drag it to the Extensions folder (inside the System Folder). If the file for your modem is not listed, try using an existing modem file from the
5Choose the port that your PC Card modem is in.
You should see either upper or lower PC Card slot listed. If you don’t, make sure your modem is properly inserted.
If you even insert the PC Card modem in the other slot, you need to reselect the modem port.