When the Machine Does Not Operate As Wanted
When a Job Is Not Performed
1 | If you cannot execute a function, it may be that the machine is being held up by |
another function. | |
|
If you cannot execute a function, terminate any other functions currently active, and then try executing the function again. In certain cases, you can carry out another job (copier, document server, printer, scanner) without canceling the current job being performed. Performing multiple functions simultaneously like this is called
Combination Chart
❖Function Compatibility
The chart shows Function Compatibility when print priority is set to “Inter- leave”. See “General Features”, General Settings Guide.
: Simultaneous operations are possible.
: Operation is enabled when the relevant function key is pressed and re- mote switching (of the scanner/external extension) is done.
: Operation is enabled when the {Interrupt} key is pressed to interrupt the preceding operation.
→: Operation is performed automatically once the preceding operation ends.
⋅ : The operation must be started once the preceding operation ends. (Simul- taneous operations are not possible.)
Mode after you select
Mode before you select
Copy | Operations for |
| Copying |
| Copying |
|
|
Copy |
| Interrupt Copying |
| Printer |
| Scanner |
| TWAIN | Document Server |
|
| DeskTopBinder | Web Document Server |
Operations for Copying | Copying | Operations for Copying | Copying | Data Reception | Printing | Operations for Scanning | Scanning | Scanning | Operations for Document Server | Scanning a Document to Store in Document Server | Printing from Document Server | Printing | Printing |
⋅⋅
| → |
| ⋅ |
| |
|
14