Troubleshooting When Using the Printer Function
When a Message Appears
This section describes the principal messages that appear on the panel display. If a message not described here appears, act according to the message.
Note
❒Before turning the main power off, see “Turning On the Power”, About This Machine.
Reference
|
| “Turning On the Power”, About This Machine | |
3 | |||
|
| ||
|
|
|
Status Messages
This section describes the machine status messages.
Message | Status |
|
|
Ready | This is the default ready message. The machine is ready |
| for use. No action is required. |
|
|
Waiting... | The machine is waiting for the next data to print. Wait a |
| while. |
|
|
Offline | The machine is offline. To start printing, switch the ma- |
| chine online by pressing [Online]. |
|
|
Please wait. | This message might appear for a second or two while the |
| machine is preparing, performing initial adjustments, or |
| adding toner. Wait a while. |
|
|
Job Suspended... | All jobs in the machine are suspended. Wait a while. |
|
|
Hex Dump Mode | In the Hex Dump mode, the machine receives data in |
| hexadecimal format. Turn off the machine after printing, |
| and then turn back on. |
|
|
Resetting job... | The machine is resetting the print job. Wait until |
| “Ready” appears on the display panel. |
|
|
Setting change... | The machine is setting changing. You cannot use the con- |
| trol panel while this message is displayed. Wait a while. |
|
|
30