Maintaining Your Machine
Maintaining Your Machine
If the exposure glass, or platen plate is dirty, copy clarity may be reduced. Clean these parts if they are dirty.
Important
❒Do not use chemical cleaners or organic solvents, such as thinner or benzene. If such substances get inside the machine or melt plastic parts, a failure might occur.
❒Do not clean parts other than those explicitly specified in this manual. Other parts should only be cleaned by your service representative.
❖How to maintain
Cleaning the machine: Wipe the machine with a soft, dry cloth. If this does not remove the dirt, wipe the machine with a damp and tightly wrung cloth. If a damp cloth still does not remove the dirt, try using a mild detergent. Wipe the machine with a dry cloth to remove the moisture, after using a damp cloth.
Cleaning Inside the Original Cover
If you open the original cover, you can access the exposure glass and original feed mechanism.
|
|
|
|
A Open the original cover while holding it on both sides. | 7 | ||
|
|
|
|
|
|
|
|
ATJ038S
B Wipe the exposure glass with soft, dry cloth.
ATJ039S
79