6. Clearing Misfeeds
This chapter explains what to do when paper or originals misfeed (become jammed inside the machine).
Removing Jammed Paper
RCAUTION:
•The fusing section of this machine might be very hot. Caution should be tak- en when removing misfed paper.
RCAUTION:
•Be careful when replacing the roll paper or removing misfed paper by follow- ing the operating instructions properly. Otherwise, an injury may result from the paper cutter inside.
RCAUTION:
•When replacing or loading the paper, or clearing paper jams, pull out the cut paper tray slowly with both hands. Do not pull out the cut paper tray with a single hand. Otherwise the rear of the cut paper tray may fall and an injury may result.
RCAUTION:
•Keep your hands clear of the paper exit area and the inside of the folding finisher. You can trap your fingers if you do not.
Important
❒When clearing misfeeds, do not turn off the operation switch. If you do, your settings will be lost.
❒To prevent misfeeds, do not leave any torn scraps of paper inside the machine.
❒Contact your service representative if misfeeds occur frequently.
Note
❒For details about how to locate and remove misfeeds, see “Locating Jammed Paper” or “Removing Jammed Paper”.
❒On the original cover, paper output exit cover, or paper roll tray, there is a sticker explaining how to remove misfed paper.
Reference
67