Problem | Cause | Solution | Page | |||
|
|
| Camera is shut off. | Rotate the function dial to | and slide the power | 18 |
|
|
|
| switch to turn on the camera. |
|
|
|
|
| Batteries are exhausted. | Replace all four batteries or use the AC adapter | 25 | |
|
|
|
| ( sold separately ). |
| 28 |
The image | Batteries are inserted with the | Remove the batteries and then insert the batteries by |
| |||
polarity reversed. | following the +/- diagram indicated in front of the bat- | 25 | ||||
will not play |
|
|
|
| ||
back on |
| The CF card is not inserted into | When "NO CARD" is displayed on the LCD monitor and |
| ||
the LCD | the camera. | "CF" is displayed on the data panel, the CF card is not | 29 | |||
monitor. |
| installed. Install the CF card. |
|
| ||
|
|
| The auto | Slide the power switch to turn on the camera. | 18 | |
|
|
| timed out and shut off the camera. |
|
|
|
|
|
| The green focus lamp blinks | The camera is busy reading the image data from the |
| |
|
|
| slowly and "PLAYBACK" blinks | CF card. Simply wait until this function is complete | 29 | |
|
|
| on the LCD monitor. | and "PLAY BACK" stops blinking on the LCD monitor. |
| |
|
|
|
| |||
The image | Subject is out of the flash | Retake the photo within the flash range ( 0.4 to 3 m ) . | 44 | |||
recorded in | range. |
|
|
| ||
the flash |
|
|
|
| ||
mode is |
|
|
|
| ||
dark. |
|
|
|
| ||
|
|
|
|
|
|
|
153