Argus Camera DC3810 manual Self-Timer, Focus the camera and press the shutter-release button

SELF-TIMER

Using the self timer, the camera will snap a shot ten seconds after pressing the shutter-release button.

1 Preferably, mount the camera onto a tripod. Turn on camera with the function dial set to .

2 Press the ENTER button 3 times to change the drive mode to

SELF-TIMER .

3 Focus the camera and press the shutter-release button.

The self-timer lamp on the front of the camera will blink and the camera will emit chimes. Two seconds before the picture is taken, the blinking and chime intervals increase. (Beep must be on to hear chimes--see page 123.)

Do not press the shutter-release button when standing in front of the camera. The camera cannot

focus. To interrupt the self-timer shot, rotate the function dial to , PC or SETUP