Argus Camera DC3810 manual Troubleshooting, Problem Cause Solution

TROUBLESHOOTING

If you experience difficulties, check the following items. Should the difficulty persist, contact Argus at

1-888-552-7487 or e-mail us at customerservice@arguscamera.com

Problem	Cause		Solution	Page
The camera will not	Lighting's too dark, foreground in-		Switch to focus lock or manual	39
focus in the autofocus	vades the subject, low contrast, or		focus mode. Make sure light source	40
mode.	aiming at bright, reflective surface.		is behind you.
	The subject is under the minimum		Check the distance to subject and move
	or over the maximum focusing		forward or backward accordingly,
	distance.		or simply change the focus setting.	37-43
The shutter-release	No power to camera.		Rotate the function dial to
button won't release.			and slide the power switch to turn	33
	The function dial is not set at	.	on the camera.
	The previous image is loading		Simply wait for the image to load	35
	onto the CF card. (this function		onto the CF card. The green focus
	takes less than five seconds--the		lamp will stop blinking and "Record-
	green focus lamp will blink)		ing" will stop flashing on the LCD.
				151