Video-Assist-System
MENU VIDEO/TEXT ADJUST
ON | |
- LINE INTERP. | ON |
- BNC OUT | VBS |
Y/C DATA |
|
- MINI MON DATA | ON |
- TXT WHITE LEV. | 2 |
- TXT INVERS | ON |
- TXT FINE POS | 5 |
- EXIT |
|
10.4.5 Video and Text Adjustment Menu
This sub menu allows to change basic video settings as well as the appearance of the inserted man readable text.
Changing them immediately activates all settings. Check all settings on the connected monitor.
• Enter the Video/Text Adjust submenu from the main menu.
Flicker free on/off
Flicker free can be switched off to bypass the digital frame store and have the video assist output with no delay.
The film camera runs normally at a different speed than the video assist. E.g. the film camera runs at 24 fps and the video assist at 25 fps for PAL or 30 fps for NTSC. This would normally cause different brightness of the video image. To eliminate this so called flicker, video images are stored at the speed of the film camera into the video frame storage and recalled in the speed of the video system. This storage might cause a slight delay, which is not desirable in some crucial time conditions, e.g. motion control or shooting of a pop video. Therefore it is possible to switch the flicker free system off. This will eliminate the delay. However, flicker will occur in this mode.
108