Mode 5

Changing the Run up Speed:

In menu 5 the run up speed can be changed in two steps. The faster run up speed uses less film, but sometimes when Steadicams or a very long power cable is used a longer run up time is easier on the batteries.

•Depress the “SEL“-key until the desired run up speed blinks.

•Select the desired run up speed by pressing the “SEL”- button.

Displaying software versions

•Press “SET“ for three seconds in the rampspeed menu: the first line will display Sxx.xx for the camera software version.

The second line will display Fxx.xx for the FPGA software version

•Press “SEL“: the first line will display bxx.xx for the bootloader software version.

The second line will display Pxx.xx for the software version.

setting

ramping speed

 

 

LO

25f/s2

HI

40f/s2

 

 

Camera Operation

65