Setting a Programmed Frame Rate (Mode 2)

Standby Operation

•Change from Mode 1 to Mode 2 by depressing the “MODE”-button once.

•Depress the “SEL”-button repeatedly until the digit to be set blinks.

•Depress the “SET”-button repeatedly until the desired value is reached.

•Repeat this procedure until all digits are set to the desired values. A final confirmation of the set frame rate is not necessary.

Note:

The frame rate can be set between 1 and 60 fps

 

forward and 25 fps reverse.

Note:

The programmed frame rate is stored in a non-

 

volatile memory.

Switching Between Forward and Reverse Operation (Mode 2)

Standby Operation

•Change from Mode 1 to Mode 2 by depressing the “MODE”-button once.

•Depress the “SEL”-button; “Cd” (Camera direction) blinks.

•Hold the “SET”-button depressed for more than three seconds. The display shows an “R” for reverse operation at the bottom left.

Changing the Frame Rate while the Camera is Running

By means of the “NORM” and “PS/CCU”-buttons it is possible to switch between the standard frame rate (“NORM”) and the pro-grammed frame rate (“PS/CCU”) while the camera is running.

Camera Operation

61