Maintenance

holder plate

guide rollers

screws

running surfaces

Magazine

Cleaning the Throat Assembly

The throat assembly ➪ photo can be disassembled for cleaning.

•Loosen the three screws ➪ photo on the throat assembly cover ➪ photo.

•Remove the holder plate ➪ photo for the loop protector.

•Pull out the throat assembly cover.

•Clean the film running surfaces ➪ photo and guide rollers ➪ photo with a brush.

•Put the throat assembly cover back in place.

•Replace the holder plate for the loop protector and re- tighten the throat assembly cover with the three screws.

Setting Friction on the Shoulder Magazine

•Swing the roller arm ➪ photo away from the winding shaft until it locks in place.

•Unscrew the three screws on the transparent tensioning plate ➪ photo.

•Remove the plate.

•Place a film core on the take-up side.

•Place the core adapter ➪ photo on the feed-side.

•Place the tension measurement device ➪ photo on the core adapter on the feed side.

152