Load Settings
It is possible to load one out of six settings. Those new settings will influence all adjustments that can be made electronically.
The new settings will immediately replace the previous settings. If the old settings might be needed, store them first as described in the next chapter Store Settings.
•Move the cursor > with the keys Ê and Ë to the line
– LOAD SET. Pressing the key Í will switch from 1 to 2 all the way up to 6 and back to 1, the key Ì will switch in the opposite direction. Pressing either the key Í or Ì, will immediately load the new settings.
Store Settings
The set of settings, that are currently active, can be stored as one out of six settings.
•Move the cursor > with the keys Ê and Ë to the line
– STORE SET. Pressing the key Í will switch from 1 to 2 all the way up to 6 and back to 1, the key Ì will switch in the opposite direction.
•When the demanded number was reached, press the Enter/Insert key Ñ to store this setting under the given number. The word DONE will appear for 3 seconds to indicate that the setting was stored. After this, the display will return to its normal mode.
MENU LOAD/STORE |
|
4 | |
- STORE SET | 4 |
(CONFIRM BY |
|
ENTER) |
|
- SET ALL |
|
SETTINGS TO |
|
DEFAULT |
|
- EXIT |
|
|
|
MENU LOAD/STORE |
|
- LOAD SET | 4 |
4 | |
(CONFIRM BY |
|
ENTER) |
|
- SET ALL SETTINGS TO DEFAULT
- EXIT
99