Video-Assist-System

MENU LOAD/STORE

 

-> -

LOAD SET

1

-

STORE SET

1

(CONFIRM BY ENTER)

- SET ALL SETTINGS TO DEFAULT

- EXIT

10.4.3 Load/Store Menu

The IVS can store up to 6 sets of settings and recall them. Thus it is possible to make all settings for e.g. indoor shooting and store them as setting 1. Shooting continues with some exterior scenes and the operator will make all settings for this and store them as setting 2. When the work is continued indoor, it is very easy recalling all the settings stored as setting 1 and get the same image appearance as before.

One set of settings consists of all set-ups in the IVS. Everything which can be set electronically, will be stored and recalled. All video adjustments such as manual gain control, white balance, flicker free, outputs with or without data and line interpolation as well as all inserter setups, e.g. user text insertion off or on, frame lines and so on are stored and recalled.

The adjustment of the white level of the inserted data, an inverse display and a fine adjustment of the vertical position is described in chapters 10.4.5 White Level, Inverse and Fine Positioning.

Changing them immediately activates all settings. Check all settings on the connected monitor.

• Enter the Load/Store submenu from the main menu.

98