Low Mode Handle
The low mode handle is a triple post handle. It can be mounted to the camera using 3 hexagonal screws ➪ photo.
To the low mode handle various accessories can be attached using the 3/8” holes.
The low mode handle can be extended with the handle extension block ➪ photo. The handle extension block can be mounted to any of the 3/8” holes by first placing the 2 pins ➪ photo into the according pin holes on the handle and then fastening the extension block screw
➪photo inside the extension block by using a long 5mm allen key. Note that the viewfinder cannot be swung over to the camera right side when the Handle Extension Block is attached to the front of the Low Mode Handle.
Note: | The low mode handle is positioned in the center |
| of gravity. |
handle extension block
hexagonal screws
handle extension block
extension block screw
pins
Installation
21