With the Low-Mode Riser, plate-to-lens distance is increased, but the plate level is now above the level of the viewfinder; a longer plate attached to the Riser will not collide with the viewfinder. This is especially useful in situations where rapid switching between operation in low-mode and operation with viewfinder is necessary.
A measuring tape hook is located camera right on the Low-Mode Bracket, and both the Low-Mode Bracket and Low-Mode Riser offer diverse attachment points for additional accessories.
Side Bracket SBR-1
The 235 Side Bracket SBR-1 (K2.55015.0) ➪ photo offers two adjustable 19mm support rods positioned camera right for attachment of lens motors, Lightweight Follow Focus LFF-1 (K0.60021.0) and other accessories with rod mounts. It attaches to the 235 via the right-side 3/8“ accessory mounting point and the rosette mount. For a further setup with the handgrip, the SBR-1 retains its own rosette mount
