Work Light WL-3

•Screw the dovetail-adapter to the handgrip.

•Slide the work light into the dovetail-guide and clamp.

•Connect the plug to the “RS”-socket.

•By adjusting the flexible arm, bring the work light into the desired position. The work light can be turned on and off with the ring on the lamp head ➪ photo. The brightness of the work light can be adjusted with the mechanical aperture.

Heated Eyecup HE-4

The heated eyecup prevents the eyepiece ➪ photo from fogging in low temperatures e.g. when filming outdoors in winter.

•Pull the normal eyecup off the eyepiece, then place the heated eyecup on the eyepiece.

•Plug the heated eyecup with cable KC-42S to the RS- socket.

•Set the heating level with the toggle switch ➪ photo: “LO”: low heat output

“HI”: higher heat output.

If the camera and accessories are powered by battery, it is recommended to switch off the eyecup-heating during extended breaks in filming.

WL-3

HE-4

Accessories

137