Magazines

6.2 Removing Exposed Film

roller arm

The following steps should be carried out in a darkroom or a changing bag!

•Check if the entire film has been wound into the interior of the magazine. If not, transport the film into the magazine by turning the drive gear counter-clockwise.

•To open the cover, depress the safety catch and flip the locking grip upwards. Then turn the grip counter-clock-wise.

•Lift up the cover and remove it by pulling it to the left.

•Swing the roller arm ➪ photo away from the winding shaft until it locks in place.

•Flip up the hinged locking clip on the take-up shaft.

•Pull the film roll upwards and off.

Note:

When pulling the film roll off the shaft, grip it

 

from underneath as far as possible to prevent

 

the middle of the film roll from sagging down.

 

The film should under no circumstances be

 

pulled tight. This could cause scratches and

 

static charging.

34