9. Camera Operation
9.1 Main Camera Switch
•First switch on the mains unit (if used).
•Connect the camera to the mains unit or to the battery.
•Push the “ON/OFF” button ➪ photo to turn the camera on. Push the “ON/OFF” button for approx. 3 seconds to turn the camera off again.
Note: | When the camera power cable is unplugged |
| and then plugged in again, the camera will be |
| on or off depending on ist state before the |
| camera cable was unplugged. |
9.2 Running and Stopping the Camera
A
Running the Camera
If the operation control indicator glows red while in standby, the camera is not ready and will not run
(see “Overview of Display Symbols”).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ON/OFF button | RUN button | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
operational control indicator |
| RUN button | ||
| ||||
Camera Operation
53