Low Mode Support LMS-1
The Low Mode Support LMS-1 ➪ photo is a sturdy triple post camera handle with integrated Steadicam low mode plate that attaches to the 235 camera body. It consists of the Low Mode Bracket (K4.65142.0) ➪ photo, the Low Mode Support Handle (K4.65140.0) ➪ photo and Low Mode Riser (K4.65141.0) ➪ photo and is compatible with all magazines. The Low Mode Bracket is mounted with 3 hexagonal screws ➪ photo to the 235 camera body.
The Low-Mode Handle can be attached on both the basic Low-Mode Bracket or the Low-Mode Riser. There are two mounting positions on the plates, one at the rear of the plate
➪photo, and one position 65mm forwards. The handle can be mounted in either position facing forwards or rearwards; in this way, the grip balance can be adapted to best fit the magazine and lens in use.
The Low-Mode Bracket alone offers the lowest profile and smallest plate-to-lens distance, optimal for Steadicam applications. It can be attached with the viewfinder on the camera; however, since the Low-Mode Bracket remains under the level of the viewfinder itself, removal of the viewfinder will be necessary in applications requiring the attachment of a longer plate onto the Low-Mode Bracket.
Installation
low mode riser 
low mode bracket