Installation

mounting screws

base plate

support rods

sliding upper plate

4.3 Riser Plate

To use the ARRIFLEX 235 together with a bridge plate on a tripod, it is necessary to bring the camera into the correct position to the support rods. To do this, a riser plate is mounted to the bottom of the camera onto which the bridgeplate can be mounted.

Attaching the Riser Plate

•Fasten the riser plate with the two mounting screws

➪ photo using a 5mm allen key. Both cylindrical pins must glide into the holes of the camera bottom.

4.4 Bridge Plates BP-8, BP-9

The bridge plates facilitate balancing of the camera on the tripod and mounting of accessories. The BP-8 is designed for 19 mm support rods, the BP-9 for 15 mm support rods. The bridge plates consist of the base plate ➪ photo, the sliding upper plate ➪ photo and a pair of support rods

➪photo. In the standard version the support rods are 440mm long. Optionally, support rods are available in the lengths 240mm and 340mm.

16