Video-Assist-System

• Within sub menus the cursor > can be moved up and

Note:

Pressing the Enter/Insert key Ñ for more than

down again by pressing the key Ê or Ë. The keys Í

 

three seconds will cause the system to exit the

or Ì will now change settings (e. g. switch the insertion

 

on-screen programming mode completely,

of a user text window on and off), or activates functions

 

regardless of which menu is activated, with the

(position mode of a window or EXIT).

 

exception of the positioning mode.

•If the windows position mode is activated, the keys Ê or Ë will move the window across the video image. To leave the position mode press the Enter/Insert key Ñ shortly.

•To go from a sub menu back to the main menu, position the cursor > by using the keys Ê and Ë on the line EXIT and press the key Í or Ì.

•Active lines are marked with a dash symbol –.

They can be reached with the cursor > within a menu using the keys Ê and Ë. Lines may not be active because the currently selected mode does not use this feature. E.g. when gain is not in manual control mode, the line value is not active because value cannot be changed in the automatic control mode. In this case, no dash symbol – is displayed and the line cannot be reached with the cursor >. To activate this line, switch from automatic to manual gain control mode.

Changing them immediately activates all settings.

96