Activate Format Markings

If the electronic format markings are not parallel to the ground glass format markings, readjust the CCD chip with the alignment screw, as shown in chapter 10.3.3 Alignment of the image position (X-, Y- and Rotation) and focus

Note:

Only active frame lines can be positioned. If no

 

frame line is on (FORMAT OFF), no position line

 

can be reached with the cursor >. If Format 1

 

is on, only – POSITION 1 can be reached with

 

the cursor >. Only if format 1 & 2 is selected,

 

all - POSITION lines can be used.

It is possible to have no format marking (OFF), format marking number one (1), format-marking number two (2) or both format markings at the same time (1 & 2) on display.

•Move the cursor > with the keys Ê and Ë to the line

– FORMAT. Pressing the key Í will switch from OFF to 1 to 2 to 1 & 2 and back to OFF, the key Ì will switch in the opposite direction.

MENU FORMAT MARKING

 

-> - FORMAT

 

1

- POSITION 1 Ö

 

- POSITION 1 Ü

 

POSITION 2

Ö

 

POSITION 2

Ü

 

- WHITE LEVEL

2

- OUTSIDE

 

LIGHT

- EXIT

Video-Assist-System

115