Magazines

•By again turning the drive gear counter-clockwise, trans- port the film inside the magazine.

•Flip up the hinged locking clip on the take-up shaft

➪ photo.

•Place an empty film core on the take-up shaft. Ensure that the take-up shaft catch engages the slot on the plastic core.

•Press down the hinged locking clip on the take-up shaft.

•Insert the film into the slit of the film core ➪ photo.

•Wind the film on several revolutions until it is certain that the film is firmly seated on the film core.

•Check that the film is being taken up perpendicular to the shaft ➪ photo.

•Close the magazine cover by inserting the two latches into the slits of the magazine housing and then closing the cover. The roller arm will be automatically unlocked.

•To lock the cover, turn the locking grip clockwise and flip it back into the recess.

The safety catch locks automatically.

slit

loaded magazine

film core

hinged locking clip

32