Video-Assist-System

MENU VIDEO/TEXT ADJUST

- FLICKERFREE

ON

- LINE INTERP.

ON

-> - BNC OUT

Y/C

- Y/C DATA

ON

- MINI MON DATA

ON

- TXT WHITE LEV.

2

- TXT INVERS

ON

-TXT FINE POS. 2

-EXIT

Black and White Output

The Y part of the Y/C output is a standard black and white signal. To get black and white, use a standard BNC cable with 75 Ω connected to the É/Y output and switch to Y/C out.

Black and white or Y signal is only available if the output is switched to Y/C out.

•Use the on-screen program mode to switch between composite and Y/C. Enter the main menu by pressing the Enter/Insert key Ñ for more than 3 seconds. Go to sub menu VIDEO/TEXT ADJUST. The menu line BNC OUT can be switched between VBS and Y/C.

See chapter 10.4 Inserter Facilities for information on the on-screen program mode.

There are normal video and video with data signals available from the same connector.

76