Mini-Monitor Output as normal video or video with data

The mini monitor output can be programmed to have normal video or video with data.

If the on-screen menu control is on (red LED next to the Enter/Insert key Ñis on), there will always be data in this output. This is necessary because if the output is switched to data off, no insert were available and therefore, it would be impossible to go back into the on-screen menu to change the settings.

•Move the cursor > with the keys Ê and Ë to the line - MINI MON DATA. Pressing the key Í or Ì will switch insertion of data in the mini monitor ON and OFF.

White Level

This line is used to change the brightness of all man-readable windows but the frame lines. Value 0 means dark gray, value 3 corresponds to bright white characters.

•Move the cursor > with the keys Ê and Ë to the line - TXT WHITE LEV.. By pressing the key Í the values for the brightness of the characters will increment beginning from 0 to 3, and after that back to 0. The key Ì will decrement in the opposite direction.

MENU VIDEO/TEXT ADJUST

- FLICKERFREE

ON

- LINE INTERP.

ON

- BNC OUT

VBS

- Y/C DATA

ON

-> - MINI MON DATA

ON

- TXT WHITE LEV.

2

- TXT INVERS

ON

- TXT FINE POS

5

- EXIT

 

MENU VIDEO/TEXT ADJUST

- FLICKERFREE

ON

- LINE INTERP.

ON

- BNC OUT

VBS

- Y/C DATA

ON

- MINI MON DATA

ON

-> - TXT WHITE LEV.

2

- TXT INVERS

ON

- TXT FINE POS

5

- EXIT

 

Video-Assist-System

111